Why ADAS Calibration Matters in Crowley, TX
Why ADAS Calibration Matters After a Collision in Crowley, TX
After an accident in Crowley, maybe near FM 731 or on a busy stretch of Main Street—your vehicle gets repaired and looks brand new. But there’s something else that needs attention before it’s truly road-ready: ADAS calibration.
If your car has modern safety features like lane keep assist, automatic emergency braking, or adaptive cruise control, a collision—even a minor one—can throw those systems out of alignment. At Silver Lining Collision, we help Crowley drivers make sure their vehicle’s Advanced Driver Assistance Systems (ADAS) are properly calibrated after repairs. Here’s why it’s essential.
What Is ADAS?
ADAS stands for Advanced Driver Assistance Systems, and includes:
- Lane departure warning
- Blind spot monitoring
- Rear cross-traffic alert
- Automatic emergency break
- Forward collision warning
- Parking assistance and 360° cameras
These features rely on sensors, cameras, and radar units located behind your bumpers, windshields, grilles, and mirrors. If any of these are bumped, shifted, or removed during repairs, the entire system needs to be re-calibrated to function properly.
What Happens If ADAS Isn’t Recalibrated?
If your ADAS sensors are slightly misaligned, they may:
- Fail to detect other vehicles or obstacles
- Trigger false alerts or brake unnecessarily
- Cause your vehicle to veer or pull due to incorrect lane guidance
- Shut down safety systems without warning
In short, your car might seem safe to drive—but it isn’t operating the way it was designed to protect you.
ADAS and Collision Repairs Go Hand-in-Hand
Many Crowley drivers assume ADAS calibration only matters after a major accident—but that’s not the case. You may need calibration if your repair is involved:
- Bumper or fender replacement
- Windshield replacement
- Suspension or steering repairs
- Sensor or camera removal for repainting
- Any frame or unibody adjustment
Even a minor tap in a parking lot can knock a radar sensor just enough to throw off performance.
We Calibrate ADAS In-House
At Silver Lining Collision, we don’t outsource calibration—we do it here in our shop using factory-grade tools and OEM repair procedures. That means:
- Your sensors are adjusted to exact manufacturer specs
- No guesswork or “good enough” approaches
- Documentation of successful calibration for your records and insurer
- You get a car that not only looks fixed—but drives like it was never damaged
Don’t Assume It Was Done
Not every shop in Crowley recalibrates ADAS systems unless they’re required to. And some insurance companies may try to cut it from the repair order to save a few dollars.
We push back. We insist on what’s necessary to make your car safe. And we don’t deliver a vehicle until it’s been scanned, reset, and road-tested with all ADAS systems verified.
Schedule an ADAS Calibration or Post-Collision Scan
If you’ve recently had a collision repair in Crowley—or even had your windshield replaced—don’t take, chances. Call Silver Lining Collision at (817) 615-9575 for a free ADAS calibration consultation. We’ll check your systems, recalibrate them if needed, and give you peace of mind that every warning, alert, and automatic response is working exactly as it should.
